Air-to-air heat pumps

These systems use air on both sides (on coils) and provide heating or cooling. In the cooling mode, heat is removed from the air in the space and discharged to the outside air. In the heating mode, heat is removed from the outside air and discharged to air in the space. In these units, it is necessary to provide defrost controls and periods to maintain maximum efficiency. These are the most popular systems for residential and commercial applications because of easy economical installation and lower maintenance cost.

Depending on climate, air-source heat pumps (including their supplementary resistance heat) are about 1.5 to 3 times more efficient than resistance heating alone. Operating efficiency has improved since the 1970s, making their operating cost generally competitive with combustion-based systems, depending on local fuel prices. With their outdoor unit subject to weathering, some maintenance should be expected.

The most popular heat pump is the air-source type (air-to-air) which operates in two basic modes:

• As an air-conditioner, a heat pump’s indoor coil (heat exchanger) extracts heat from the interior of a structure and pumps it to the coil in the unit outside where it is discharged to the air outside (hence the term air-to-air heat pump), and
• As a heating device the heat pump’s outdoor coil (heat exchanger) extracts heat from the air outside and pumps it indoors where it is discharged to the air inside.

Popularity: 1% [?]

Related posts:

  1. Air-to-water heat pumps In Figure 4.2, these systems work in reverse of the water-to-air heat pumps: they extract heat from ambient or...
  2. Water-to-air heat pumps Some heat pumps have been designed to operate utilizing a water source instead of an air source simply by designing...
  3. Ground-to-water and ground-to-air heat pumps In these systems, coil A in Figure 4.2 is buried underground and heat is extracted from the ground. These heat...
  4. Classification of Heat Pumps A systematic classification of the different types of heat pumps is difficult because the classification can be made from numerous...
  5. Air for Heat Source of Heat Pump While ambient air is free and widely available, there are a number of problems associated with its use as a...

Top incoming search terms for this post

Post a Response